Category Archives: Insider stuff

Bye Bye Seagate STL1000LM014

Yesterday, I was bopping along and working away. Somewhere after lunch I noticed my D: drive had gone missing. I’ve been working feverishly to try to resuscitate that volume, but it ain’t coming back. Good thing I back it up frequently. I just restored the folders I care about most from that backup (and know where to find more, if I need them). So now, it’s time to say: Bye bye Seagate STL1000LM014.

Impacts from Bye Bye Seagate ST1000LM014

A bit of surprise and upset was my first reaction. But then, I looked at the manufacture date: 2014. Hmmm … let’s see … that’s 8-9 years ago. So, actually, not too surprising. I spent a couple of hours trying to recover the drive. But it won’t read in Windows for more than a minute or two before it falls over and throws a “failed USB device” error. So, I’m retiring this drive from service. I wasn’t able to recover its contents or restore it to working condition using Disk Management, MiniTool Partition Wizard, or SeaTools. That means it’s time for it to go.

It’s already been replaced with a different 2.5″ drive. It was mounted in a pop-out drive cage, which made it easy to remove the dead drive and drop in a live replacement. This time around, I’m going with a Seagate ST2000LX001FireCuda 2TB model, manufactured in 2020 or thereabouts. It should last for a while yet (at least 5 more years if the previous iteration is any guide). I think I’ll be OK.

Thank God for Good Backup!

I’m so glad I made the old D: drive part of my daily backup routine. I didn’t lose more than a day’s work. Now, I have to clean up the backup definition and make sure I’m still covered when the next drive fails. As they often say here in Windows-World: it’s always something!

Facebooklinkedin
Facebooklinkedin

Happy World Backup Day 2023

Courtesy of NeoWin, I’ve just learned that March 31 is World Backup Day. There’s even a website at — you guessed it — worldbackupday.com. Sponsors include Amazon, Mega (file download service provider), iStorage and Backblaze (online backup/storage providers) and mijn.host, along with the World Backup Day organization. There’s even a pledge: “I solemnly swear to backup my important documents and previous memories on March 31st. #WorldBackupDay.” Indeed, let me wish all readers a happy World Backup Day 2023.

Note: the intro graphic comes from the WorldBackupDay.com home page, and is intended to motivate people to back up their stuff. I can only endorse this proposition. I myself learned the importance and value of backups in 1990 when a 300MB SCSI drive on a Mac died on me, and lost me a book I was writing at the time (and more). It was a disaster! But I learned my lesson, and I’ve lost nothing important since to the slings and arrows of outrageous fortune.

What Happens on World Backup Day 2023?

Ideally, everybody makes sure they make a backup of everything they want to keep, or protect against damage, loss or breach. Personally, I back up my production PC daily (including the system drive, plus two smaller drives where I keep all ongoing project work).

But there’s more:

  1. You must know how to restore the backups you make.
  2. You should make yourself familiar with rescue or repair media so you can boot and restore a backup even on a PC (or other device) that’s not booting normally. Some backup packages require separate bootable media for each protected PC (I have a tray full of teeny-tiny Mushkin Atom flash drives for just that purpose).
  3. You should practice a restore occasionally. I end up using restore capabilities at least once a month myself — mostly because of self-inflicted issues arising from experiments — so I’m always ready to rock’n’roll.
  4. Ideally, you should keep one or more backups offsite or online. That way if a meteorite takes out your home or office, you can still get back online by restoring to a different PC. I keep two backups in the cloud: one on OneDrive, the other in Norton Backup.

My basic guiding principle is that anything worth storing once is worth backing up at least twice (as just described). Thus, let me repeat the salutation “Happy World Backup Day 2023” and gently urge you to backup, backup, backup. Cheers!

(Free) Backup Software Worth Using

My go-to backup solution has long been Macrium Reflect Free (I also use the paid version). But its maker, Paramount Software, has announced its discontinuing that version at the end of 2023. I’m casting about for a replacement, given that something free is important for me and my fleet of 10 PCs (6 of which are loaners from Lenovo for testing purposes). I’m digging into stories like this one (and more like it) at PC World The best free backup software and services…” and Lifewire‘s more comprehensive coverage to find a Goldilocks solution that’s “just right.” Stay tuned…

 

Facebooklinkedin
Facebooklinkedin

The Never-ending Windows Update Story Carries On

Back on March 6, I posted an item about Windows Application Update Rhythms. This offered a snapshot for a week’s update activities across my various PCs. Since then, of course, the updates have continued as the never-ending Windows Update story carries on. I’ve made some interesting observations since then, too.

The lead-in graphic above shows one such data point. I’ve begun to notice that sometimes Winget will update Chrome, and sometimes it won’t. It seems to be related to whether or not the app is open at the moment (yes if closed; no if open).

Never-ending Windows Update Story Keeps Going…

The same thing appears to be true for PowerShell as well, as you can see in this next screencap. Amusingly, the app itself is PowerShell so indeed it’s obviously running too. But there are ways to force a PS upgrade within the app, so this default behavior can be over-ridden. The second post in this SuperUser thread explains how to do just that. It grabs and uses the PS install MSI from GitHub to make that happen.

Never-ending Windows Update Story.update-PS

Winget updates neither Chrome nor PowerShell here.

What’s Behind the Apparent No-Upgrade Behavior?

In various discussions online as to what’s at work here, I learned (or re-learned) a few things. When installer formats change (MSIX to MSI, MSI to EXE, and so forth) Winget won’t perform the update. Indeed, I’ve seen explicit messages to this effect in Winget output from time to time. This Answers.Microsoft.com thread explains how to grab, then use, the download URL for the Chrome installer to bypass the failed (and silent, error-message-wise) Winget update. Likewise interesting!

The more I work with Winget, the more I learn about its various hiccups and gotchas. But the tool continues to impress because there’s nearly always a clever workaround to get things done. It’s definitely made the various installments of the never-ending Windows Update story around Chez Tittel shorter and more entertaining. What more could a Windows-head like me want?

Facebooklinkedin
Facebooklinkedin

Macrium Reflect Swamps CPU Short-Term

Whoa there! I couldn’t help but notice that my production PC slowed briefly to a crawl this morning. A not-so-welcome first, in fact. A quick jump to Task Manager showed me the Macrium Reflect Backup tool was the culprit, with CPU utlization stuck north of 75%. It took about 5 minutes to subside to normal levels. This tells me quite a lot, but let’s start with the blunt observation that Macrium Reflect swamps CPU short-term.

Note: I cheated on the lead-in graphic. It’s from a much older PC where it’s frightfully easy to swamp that CPU. Notice all four cores are pegged at 100% utilization in the ever-handy CPU Usage gadget. I have 8 threads on 4 cores on the i7-Skylake production unit, and they were all likewise pegged at 100%, albeit for a short time. Thus, I saw what I show here, doubled, as that PC bogged down.

What Does Macrium Reflect Swamps CPU Short-Term Mean?

Good question. Beyond the inescapable fact that this program — which was running my daily 9AM backup when this happened — brought my production PC to its knees, there’s more. Let me spell a few things out:

1. This is an i7-Skylake (6th gen) Intel CPU [3.4GHz], 32 GB RAM [DDR4-2133], 512 GB NVMe SSD [Samsung 950 Pro]. I built it in 2017-2018.
2. It’s not Windows 11 capable, so it’s running Windows 10 22H2 Build 19045.2788: that’s the latest preview CU scheduled for general distribution on April Patch Tuesday.
3. It’s never hit the wall performance-wise before to my notice. I beat the beejesus out of this machine daily (there are 13 apps and 148 background processes running, with 4% CPU utilization, as I write this screed). Indeed, this PC (mostly) does what I need it to do.

But it’s old and somewhat out-dated.  And I have a Ryzen 7 5800X in an Asrock B550 mobo ready to take over the production PC role. That leads me to a vital question:

Why Not Switch Over, Already?

I have lots of obvious answers including inertia, laziness, ongoing usability and the usual fiddle-faddle. But here’s the real reason, in succinct visual form:

Macrium Reflect Swamps CPU Short-Term.This PC

Count ’em: 10 mounted physical drives (4 SSDs, 6 HDDs).
[Click image for full-sized view.]

This totals up to about a nominal 16TB  of storage, of which 40% or so is occupied. Thus, we’re talking around ~6.5 TB of stuff, of which I need to keep at least 5TB’s worth. There’s going to be some thinking, planning, time and effort involved in moving my show to another PC. I’ll have to back everything up to another drive (an 8TB unit should do) and then figure how to map it into a new set of storage devices on the target PC. That should be interesting. I guess I’d better get started. This morning, I got my “early warning!”

Facebooklinkedin
Facebooklinkedin

Flaky Switch Prompts Mouse Hunt

I can tell the end is near — for my Microsoft Wireless Mobile Mouse 3500, that is. In this case, a flaky switch prompts mouse hunt for a replacement. What’s going on? Sometimes, when I click the mouse nothing happens. Sometimes, when I want to left-click once, it clicks twice — and even more annoyingly, vice-versa. Alas, this means the left-side contact switch is starting to fail. I’ve ridden enough meese into the dirt to recognize that this device is at end-of-life.

When Flaky Switch Prompts Mouse Hunt, Amazon Calls…

I have to laugh. It’s going to cost me a whole whopping US$12 to replace this unit. I always buy two, in fact, so I’ll have a spare if something goes wrong with the primary. I blush to confess, therefore, that when the previous primary went south and I fired up the secondary — the one I’m using now — I neglected to order an immediate replacement. That’s why I need to order two today. Just ordered!

I’m a great believer in keeping spares around — for everything. Indeed, if this current mouse dies before its replacement shows up, I’ve got a couple of Bluetooth meese (and corresponding USB3 dongles for my desktop) that I can use in the meantime. Ditto for network interfaces, removable storage, GbE cables and switches, keyboards and more. In my experience the only spare you really, really need is the one you forgot to order when the predecessor failed.

So far, things here at Chez Tittel are OK. As a Prime member, Amazon will get me both replacements tomorrow. I’m not worried. But it’s always good to stay on top of these things.

Cheers!

Note Added March 30 (Morning)

Amazon came through last night after I’d left home for my Wednesday evening pool league. The Boss left them sitting out on the kitchen island for me, so I saw them as soon as I walked into the house. It’s hard to overstate the satisfaction that near-instant gratification of one’s technology needs can deliver. I’ve already got one installed on my production PC. And now I have a ready spare as well. Good-oh!

Facebooklinkedin
Facebooklinkedin

Remote Access Window Clips Seconds Display

It’s a “one step forward, one step back” situation. The latest Windows 11 Insider release to the Beta Channel brings optional seconds back to the Taskbar clock. But using a remote access windows clips seconds display, as shown in the lead-in graphic. I’ve posted a report about this to the  feedback hub. Amusingly, it’s attracted an MS response from 3 months ago that says (in condensed form) “We fixed this in the Dev channel 3 months ago.” Uhhh … not really … I see it right there so it isn’t fixed.

Note: I included a snip of the Winver output from the Beta Channel Build 22624.1470 above the Taskbar clock to document its release of origin. You can see about half of the time read-out from that clock at the lower right (enough to tell that it says 11:51:45 AM, in fact).

Reporting Remote Access Window Clips Seconds Display

Here’s what I wrote to the Feedback Hub:

Text from my Feedback Hub report Friday 3/24

One more thing: when you make this change in Build 22624.1470, it doesn’t affect taskbar display until after a reboot. And indeed, upon rebooting the clock initially showed up initially sans seconds display. They showed up later on, as the PC went through its desktop initialization process after I’d logged in. That was kind of interesting, too…

What To Do About “the Clip?”

There’s not much one can do about this issue because Windows 11 still lacks icon size controls for the taskbar. From what I hear these controls are planned for inclusion in some upcoming Windows 11 release. If MS doesn’t get around to fixing this admittedly minor if not miniscule issue, access to icon sizing will probably take care of things at some later date.

I’ll also note that this issue does not occur when I log directly into that test machine (a Lenovo ThinkPad X380 Yoga [8th-gen Intel CPU, Intel graphics, 16 GB RAM]). So it really is an issue with the way the Remote Desktop  Connection application handles taskbar display at the moment. Just for grins, I also tried a connection through the Remote Desktop UWP app. For the record, it clips that window’s clock display, too. Thus, it looks like a taskbar height issue FWIW.

 

Facebooklinkedin
Facebooklinkedin

Still Behind USB4 Curve

Drat! I’ve just upgraded my two Canary test PCs to build 25324. The announcement says “We are adding a USB4 hubs and devices Settings page…” But it had been on a gradual rollout, and I think that is still happening. Why do I say that? Because one of my test machines shows TB4 and USB4 in the Thunderbolt Control Center, but there’s no USB4 page in Settings on that machine. Sigh. Alas I think that means I’m still behind USB4 curve.

That’s what you see in the lead-in graphic above. It shows no USB4 hubs in DevMgr (left), the 25324 build (middle) and the TB4/USB4 items in the Thunderbolt Control Center (right).

If I’m Still Still Behind USB4 Curve, What Now?

It could be one of two things. I don’t have the right drivers loaded (I don’t think that’s the case, but it’s possible) or I don’t have any native USB4-equipped devices. Perhaps MS hasn’t rolled this update all the way out just yet, and my PCs are still on the trailing edge. Given my history with glomming onto new features, it’s darned likely to be the latter.

In the meantime, all I can do is wait for it to show up. I’m also going to reach out to my Lenovo contacts and see if they have any history with this capability on their end. I’ve got two pretty new machines (the P16 Mobile Workstation and the U360 Ultra SFF PC) that have leading-edge TB4/USB4 capabilities. Maybe I’ll have to load the 25324 image on one or both of them and see what comes up.

In the meantime, I’m just sitting on the dock of the bay, watching the tide roll away… Wish me luck!

Concluding Note: If It’s Not There, It’s Not There…

OK, so I’m learning that USB4 support will show up inside Device Manager using the “Devices by connection” view. (See this informative MS Learn article for more info Introduction to the USB4 connection manager in Windows.) If your PC is properly outfitted you’ll see a series of entries that look like this:

⌄ USB4(TM) Host Router (Microsoft)
    › USB(TM) Root Device Router (Microsoft)
          USB4(TM) Device Router (Microsoft)

Alas, none of my PCs apparently have the right kinds of USB-C (or Type A) ports, because I can’t see this on any of them. Gives me a good excuse to ask for another Lenovo eval, I guess!

Facebooklinkedin
Facebooklinkedin

Dev Channel 24319 Gotcha

I have to laugh. I’m reading the Dev Channel Build 24319 announcement, and drooling over new features therein.  Especially the USB4 Settings page, which has long been a hobby horse for me. But there’s a Dev Channel 24319 gotcha: I can’t upgrade to a back-rev release on a Canary PC (Build 25314). As I wrote in my March 15 post “Canary Escape Requires Clean Install,” the only way back down the Insider hierarchy is to blow everything away and start over. In a nutshell, that’s the gotcha!

That’s the Dev Channel 24319 Gotcha, All Right

The near-convergence of the build numbers is what got me all excited. The latest Canary channel build is 25314; the latest Dev channel number is 24319. Just one little (leading) digit is what’s getting in the way. The progression looked natural until I paid closer attention and saw that going from 25xxx to 24xxx makes a clean install the only way to get there from here.

I knew this already, but I didn’t really think it all the way through. I got smacked in the face with this harsh reality when I mounted the ISO for 24319 on a Canary machine and got the dialog box shown above early on in the install process. As always when a clean install is the only available option the “Nothing” radio button is the only one available — indeed, it lights up by default, as shown.

Will I, or Won’t I Take the Plunge?

Here’s the deal: I’ve got 35 applications installed on the Canary machine I’m thinking of demoting via clean install. That’s a chunk of work to redo, once the clean install completes. I really want to check out the USB4 capabilities (and indeed I even have a couple of USB4 NVMe enclosure with which to check them). But I probably don’t have time to tackle this for a while. Other deadlines loom larger at the moment.

And boy howdy, is that ever the way things go here in Windows-World sometimes. Can I get another big sigh?

Facebooklinkedin
Facebooklinkedin

SUMo Developer Pays Attention

If you’ve been reading my posts lately, you’ve probably noticed that I’ve complained — just a little — recently about the Software Update Monitor (SUMo) update utility. Over the weekend, the developer himself tweeted me to let me know he’d seen my input and fixed the issue. In fact, he agreed with me that SUMo shouldn’t be recommending a preview/beta version of ANY software. Hence my assertion that the SUMO developer pays attention. He does!

If SUMo Developer Pays Attention, Then What?

He obviously read my recent (Feb 27) post entitled “Update Semantics: Current versus Preview.” And indeed, SUMo is no longer recommending an update to pre-release versions of OneDrive. As you can see in the screencap at the head of this blog post, the current version is indeed recognized as the current version now. It’s highlighted in blue, and comes up with the same version I agree is the current one. Good-oh!

But What About CPU-Z?

I thought I’d caught him out again for asserting this week that CPU-Z needed an update. The download page reports it as version 2.0.5, but SUMo wants version 2.0.5.1. And, sure enough, upon downloading and updating the latest version from the home page, it self-reports as version 2.0.5 (no fourth digit). But after updating and looking at the readme file, here’s what it says:

Sure enough, it really IS version 2.0.5.1. Says so right there!

I’ll be darned. Sometimes the toolmakers know more than the owners/developers do — or what they report, anyway. Very interesting! My thanks to @KCSoftwares: it is nice to know somebody’s paying attention.

Facebooklinkedin
Facebooklinkedin

Intel ARC Drivers Arrive Via WU

There’s a new set of Intel ARC drivers for built-in GPUs (and of course, discrete ARC devices as well). How do I know this? I just updated one of my Canary Channel test machines. During that process, I saw the Intel ARC drivers arrive via WU (Windows Update). Until this morning, I had been obtaining them exclusively from the Intel Driver & Support Assistant.

You can see the information about this latest driver from its Intel download page above. Notice the version number: 31.0.101.4146.

How Do I Know Intel ARC Drivers Arrive Via WU?

Check out the driver version in my Update History from the X12 Hybrid Tablet, captured minutes ago. Compare the version number for the “Intel Corporation – Extension” item and you’ll see it’s identical to the version number from the Intel download page.

ARC Drivers Arrive Via WU.history

The name isn’t terribly helpful, but the version number tells me what I need to know.<\p>

What else I can tell you about this alternate method is that it’s MUCH faster than installing the driver (plus supporting software) from the Intel download page. It took only 20-30 seconds to complete. The full-blown Intel package takes minutes.

Does this mean I will occasionally need to visit the Intel page to update the Intel Graphics Command Center software? Nope. The IGCC that works with Intel GPUs is a Windows Store app. And it updates itself, either through routine checks, or when you try to run that app the next time after installing a new driver.

Hey!  I might actually like this. It’s faster and less work that using the Intel Driver & Support Assistant. Good stuff, and good job: MS & Intel!

Facebooklinkedin
Facebooklinkedin